Motorbunny machines have two independent motors: a vibration motor and a rotation motor. Fluffer controls both separately, so you can set each to any intensity level without affecting the other.
Vibration motor — drives the core rumble sensation. Runs at any intensity from 0 to 100%. All Motorbunny and Fluffer devices have a vibration motor.
Rotation motor — on the Motorbunny Original, Buck, and Jack, a second motor drives a rotating or thrusting motion. The Fluffer G-Thing, G2G, and Rock Hard Power Ring are vibration-only and do not have a rotation motor.
Motor toggles — the toggle buttons on the Controller screen turn each motor on or off instantly. Toggle the vibration button to stop vibration while rotation continues, or vice versa.
Joystick in bidirectional mode — for devices with both motors, the joystick controls both in one gesture. The upper half of the joystick range controls vibration intensity; the lower half controls rotation intensity. Dragging horizontally blends both.
Motor Ratio screen — for finer control, open the Motor Ratio screen to set a fixed balance between the two motors. This is useful when you want both motors running but at different relative levels.
You can run both motors at any combination of intensities. The vibration motor and rotation motor are completely independent — setting one does not limit or affect the other.
The Jack thrusts rather than rotates. In the app, the "rotation" channel maps to the thrust motor on the Jack.
Last updated in v1.3.0
