Pairing the Playmate

The Playmate accessory connects to Fluffer over Bluetooth, just like any other device. Once connected, you pair it to your primary device inside the app to enable haptic relay and Gaming Mode.

Step 1: Connect the Playmate in the Devices tab

1. Power on the Playmate

2. Open the Devices tab in Fluffer

3. Tap Scan

4. The Playmate appears in the device list — tap it to connect

Step 2: Pair the Playmate to your primary device

After the Playmate is connected:

1. Tap the Playmate in your device list

2. Tap Pair with device

3. Select your primary Motorbunny or Fluffer device from the list

4. The Playmate is now paired

Step 3: Connect your game controller

1. Plug your USB-C game controller into the Playmate's USB-C dongle

2. The controller is now linked to the Playmate

What pairing does

Pairing links the Playmate to your primary device so haptic relay signals from the game controller are forwarded to that device. Gaming Mode uses the Playmate's IMU (accelerometer) to drive the paired device via tilt input.

Unpairing

To unpair the Playmate, tap it in the Devices tab and select Unpair. The Playmate remains connected but stops forwarding haptic signals to the previously paired device.

The Playmate itself does not vibrate or output any sensation — it only relays signals. All output goes to the paired device(s).

Last updated in v1.3.0