Storage and Noise Reduction

Storage

Where to store

• Store in a clean, dry location away from direct sunlight.

• The Motorbunny Mobility & Storage Case (available at motorbunny.com) is designed for the machine, its attachments, and accessories. It keeps everything together and protected.

Storing attachments

• Store silicone and TPE attachments separately from each other and from the machine to prevent pressure marks.

• Keep attachments in a fabric bag or the storage case rather than loose in a drawer.

Noise reduction

Motorbunny machines produce some vibration noise — the following tips minimize it significantly.

Surface matters most

• Hard floors amplify vibration noise. Carpet or a thick rug reduces it substantially.

• Placing a folded towel or blanket under the machine dampens vibration transfer to the floor.

Avoid hollow surfaces

• Hollow wood floors or raised platforms act as resonance boxes and make the machine dramatically louder.

• A firm, solid surface is always quieter.

Position the machine away from walls

• Direct wall contact or proximity to thin walls increases sound transmission.

Attachment tightness

• A loose attachment can rattle during use. Make sure it is fully and securely seated before powering on.

Speed settings

• Lower intensity settings are significantly quieter. Start low — both for noise management and for comfort.

Discretion tips

• The machine ships in a plain brown box from "Fulfillment Center" with no Motorbunny branding.

• The Motorbunny Cruiser bag (available separately) lets you transport the machine discreetly.

Last updated in v1.3.0