Quickstart Guide: Motorbunny Original
Downloadable PDF guide
The full printed quickstart guide is available as a PDF: Download Motorbunny Original Quickstart Guide (PDF)
Before your first use
Choose a firm surface. Place the machine on the floor or a firm bed. Do not use on a waterbed or unstable surface.
Position near something stable. Keep a couch, chair, or bed edge within reach for balance.
Attach your chosen attachment. Start with a flat clitoral attachment for your first session — build from there.
Set all controls to zero before powering on.
Have water-based lube nearby. Never use silicone or oil-based lubricants — they damage the silicone attachments.
Use the restroom beforehand.
Powering on
Plug in the power supply.
Turn on the machine using the main power switch.
Use the included Bluetooth controller to adjust intensity, or connect via the Fluffer app for full control.
First-use tips
Start low. The intensity range goes to 11 — start at 1 or 2 and work up gradually.
Lean forward to increase clitoral contact. Lean back to increase G-spot pressure.
Adjust the riser height using the included risers if needed.
Try buzz-only, twirl-only, and combination modes to find what works for you.
Height adjustment
Raise the machine by placing the included risers underneath. Two riser heights are available for increasing clitoral contact.
Vac-U-Lock
If you have the Vac-U-Lock adapter (included in the bundle, or purchased separately), install it in place of the standard silicone attachment mount before powering on.
Related
Last updated in v1.3.0